Search for Articles

The new Stratified Layer Technology (SLT), used for AGRI STAR II tires by the Alliance Tire Group, was presented at Fieragricola in Verona. The innovation developed by Alliance technical department, allows their tires to be widely applied to various agricultural...

In the Landini exhibition rooms, attention was entirely dedicated, the Series 7-230 Robo-Six tractor, which, presented as a world preview to the Fieragricola’s general public, fully met the visitors’ expectations. Moreover, on its top of the range, the Fabbrico team...

With the PowerSafe range’s models, equipped with an oil bath multi-disc hydraulic clutch (a technology that has been used on BCS two-wheel tractors since 2009), the firm of Abbiategrasso (Milan) is anticipating the entry into force of the EU regulations...

2020 marks the debut of the new Stage V engines on the Arion 600 and 500 tractors, and on the Axion 800. The ARION 500 models are now powered by a four-cylinder DPS engine with turbocharger (a smaller wastegate turbocharger...

The world premiere launch took place in 2018 at EIMA International’s prestigious fair. Later, in February 2019, it was Sima turn in Paris and, in autumn, Agritechnica’s. The close of Faresin Full Electric 6.26 model “roadshow” was, last January, at...

The John Deere tractor range becomes broader with the launch of the new 8R series (the official debut was last November in Hanover) thanks to which the US company has raised the bar of performance and comfort even further. Low...

To celebrate the brand’s 130th anniversary, Kubota presented a series of innovative prototypes with electric motors, from the gardening sector to the earthmoving sector, during an event held on January 15th and 16th in Kyoto showing the Japanese brand’s vision...

Primo EW Isotronic, Maschio Gaspardo’s mounted electric spreader, wins “Innovation Leaf”, the prize assigned by Fieragricola and the “Informatore Agrario” to the most innovative machinery for their economic and environmental sustainability, manufacturing quality, end user’s ease of use. The new...

Pöttinger presents the new 12-inch CCI 1200 terminal on the market. The screen offers the user a broad choice of features, and the simple and intuitive touchscreen commands provide a "tablet" experience. An integrated sensor automatically adjusts the brightness of...

Saffron is the most expensive spice in the world. Italy is one of the most important producers (Veneto and Abruzzo regions, Tuscany, Umbria, Sardinia, and Tuscia Viterbo) with a quantity varying from 450 to 600 kg, occupying about 50/55 hectares....

Attractive design, functionality, dual battery and ease of use are some of the features of the new Emak Group battery-powered lawnmowers under the Efco and Oleo-Mac brands. Lri 44 P Efco and Gi 44 P Oleo-Mac, these are the names of...

New addition to Antonio Carraro’s Tony range. At Fieragricola, the company from Campodarsego (Padua) launches the new Tony 8900 V model, a specialized tractor model with a mechanical/hydrostatic hybrid transmission and a classic frame, designed for very narrow vineyards. The...

  The growth of the Argo Tractors distribution network continues in Europe, opening of 25 new McCormick dealers in 2019 in the United Kingdom, Ireland, France and Spain. The network also expanded in Italy with four new dealers: in Sardinia...

Important news from Frandent. The Piedmontese company (the headquarters are in Osasco, Turin) specialized in the production of harrows and haymaking technologies (hay rakes and tedders) diversifies its range and enters the sowing machine segment.  The integrated Sprint seed drill...

The protagonist of the Antonio Carraro stand at the SITEVI in Montpellier (held in France from 26 to 28 November) was the brand new super compact 50 Hp TRX 5800 equipped with reversible driving, steering, with isodiametric wheels.  The features...

The DataConnect interface project, recently launched by CLAAS, John Deere and 365FarmNet, now also joined by the CNH group. With the entry of the brands CNH Industrial, Case IH, New Holland Agriculture and STEYR, the cloud-to-cloud project therefore sees the...

One of the protagonists of the latest edition of Agrilevante is Campagnola, an Emilian company engaged in the production of pneumatic and electromechanical equipment for pruning and harvesting. During the four days in Bari, Campagnola premiered the Starberry MD1, an...

It was 20 July 1969 when man first set foot on the lunar soil, pushing forward his horizon and setting new goals that were unimaginable until then. For CIMA (PV) - a company that has been a leader in the...

The cooperation agreement between Coldiretti, Eni and Bonifiche Ferraresi was signed last October in Cernobbio (CO) for the launch of activities on specific initiatives abroad, and in particular in Africa, on projects to develop local economies through the application of...

Pellenc Italia presented its new range of machines for harvesting grapes, whose “combined multifunction” coupling system received the 2019 Sitevi Innovation Awards at the latest edition of the Montpellier technology production fair, as well as presenting a new range of...

The Peruzzo company from Curtarolo (PD) chose the prestigious setting of Villa Contarini in Piazzola sul Brenta to celebrate 60 years of business. A gala dinner, the speeches by the company owners, and an evocative narration of its history are...

The launch of the second generation of Lexion combine harvesters by Claas is imminent. There are seven hybrid models and six straw walkers, ranging from 313 to 790 horsepower, equipped with the new Aps Synflow Hybrid threshing systems (on the...

The MTH multi-purpose cutter has long been one of the highlights of the FAE Group range. Today, ten years after its debut, the multi-purpose cutter is proposed by the Trentino company (the headquarters are in Fondo) after significant restyling which,...

Starting from the 2020 season, the new small square balers will be marketed by John Deere, completing the haymaking range of the US manufacturer. The new line signed by the “home of the deer” was born thanks to a partnership...

A new specialized tractor arrives at Kubota. It’s called M5111 LP and it is a low profile tractor that expands the M5001 series, of which it incorporates the salient technical characteristics. Compared to the other machines in the range, the...

Just under 190 hectares worked in 8 hours, with an average hourly rate of 23.6 hectares. This is the new windrowing world record, certified by the German DLG institute (Deutsche Landwirtschafts Gesellschaft - German Agricultural Society). The rake Kuhn GA...

Precision farming is increasingly at home on the New Holland Agriculture T8 tractors. The range of the Turin-based company sees the debut of the Genesis series equipped with the Precision Land Management Intelligence system, the New Holland platform for the...

Expansion of the range for the Angeloni team. The company based in Montecarotto (Ancona) specializing in the production of soil tillage machinery launches a new heavy-duty harrow in the FCS series, already previewed at EIMA International 2018. It is a...

On 19 and 20 July, Campagnola participated in the third edition of Vite In Campo, an event organized by L’Informatore Agrario, held at the Azienda Agricola Conte Collalto in Susegana (TV). The protagonist in the field was the Expo Doppio...

Capello, a Cuneo-based company specializing in the design and implementation of grain harvesting solutions, is firmly aiming at the German market, where the Warstein subsidiary is taking its first steps. Located in the industrial heart of Germany - the State...

The 2019 edition of Enovitis In Campo awards the Cima company of Montù Beccaria (Pavia) with the prestigious prize entitled “Technological Innovation Award”, which is given to the most innovative machines for the viticulture sector. The Dosa model (Droplet Size...

Founded in 1949 by Giuseppe Genovesi, Dalmar opened for business in Milan in the segment of industrial tubes, operating in parallel on five lines of business, to become an entrepreneurial entity able to design and supply industrial solutions tailored to companies all over the...

Emiliana Serbatoi has been officially admitted to the ARA (American Rental Association), the international association of manufacturers and suppliers of rental equipment. The entry of the Modena company into the institute founded in 1955 in the United States was formalized...

The wine sector always requires new technologies to improve agronomic and business management. Last June, among the rows of the CREA (Council for agricultural research and analysis of the agricultural economy) experimental farm for viticulture and oenology “Calle di Busco”...

Countdown to the debut on the Italian market for the John Deere 1725NT precision seeder. The manufacturer highlights the rich technological equipment of this machine, one of the top models of the John Deere range. Awarded at Sima with the...

Massey Ferguson announced in May the expansion of the MF 3700 AL ALPINE series with the introduction of three new 75, 85 and 95 horsepower tractors, specifically designed to combine stability and comfort particularly suitable for working on mountainous and...

A brand new look is on the way for the equipment of the San Vito al Tagliamento (Pordenone) brand, which specializes in the production of sowing and soil tillage machines. The Friulian company has abandoned the traditional red and yellow...

The PT-300 crawler tool carrier, a top-of-the-line model branded Prime Tech of the “medium weight” segment, rebuild the look by presenting significant technological innovations. A new feeding system with a 7-liter CAT C7.1 Acert engine, with 6 cylinders in line,...

With the entry into force of the RVBR European Regulation (EU 2015/68) relating to braking systems for towed agricultural machinery, the obligation to use dual-line braking systems has been activated. Safim of Modena, a company specialized in the sector regulated...

Presented as a world preview at EIMA 2018, the high-end L80N equal-wheeled tractor from the BCS Group are now in production and ready for market launch. Offered in the three models BCS Vithar L80N, Ferrari Thor L80N and Pasquali Mars...

After being a simple warehouse for years, since last April the BKT facility in Seregno, just outside Milan, is now a true strategic centre to win a prominent position on the European market. The new centre was inaugurated last April...

Focusing on the development of electromechanical technologies, without abandoning the core business of pneumatic equipment. This is the objective that the Bologna company Campagnola (the headquarters are in Zola Predosa), specializing in tools for pruning and harvesting olives, has set...

Turnover at 624 million, up 3% on 2017, but EBITDA down 5.8% (51.9 million compared to 55). This is what emerges from the 2018 financial statements of Carraro spa approved at the beginning of April by the shareholders’ meeting. “The...

The new line of Carrytank tanks produced by Emiliana Serbatoi was presented at Bauma 2019. During the German event, the Modena-based company launched the pick-up version of the Carrytank line, the range of plastic tanks made for transporting and delivering...

Last February, during SIMA 2019, Maschio Gaspardo was awarded the “Machine of the Year 2019” prize for the High Speed Planting technology applied to the Chrono high speed seeder. The new Maschio Group technology increases planting precision, and improves performance...

Environmental sustainability has always been one of the main themes of the industrial policies of Argo Tractors, a multinational of Fabbrico (Reggio Emilia) behind the McCormick, Landini and Valpadana brands. In this field, the prize technology developed by the Emilia...

McCormick was at the side of the Italian Agromechanical and Farmers Confederation (CAI) at the national general meeting, held in Grosseto on May 10 and 11. This is an important rendezvous for the purpose of defining the association’s objectives for...

The company, based in Brescia, (the headquarters are in Montichiari) can boast many models of steering drawbars, manufactured in compliance with the regulations in force and according to road traffic standards. Each drawbar - as the company explains in a...

It’s called Farmer Core and is a technology developed by the Californian company Trimble to connect all the information and data about operations on the farm. Available online and on all mobile devices, with the Trimble Ag Software subscription as...

Conceived for a wide range of applications on bare soil as well as hard surfaces such as concrete and asphalt, the new Alliance A585 tyre, presented at the latest SIMA in Paris, is ideal for telescopic handlers, backhoe loaders and...

Record numbers for the Jaguar self-propelled shredder. A few weeks ago, the production plant in Harsewinkel, in North Rhineland near the city of Bielefeld, baptized model number 40 thousand, confirming the great longevity of one of the most appreciated and...

The Comet Group and its subsidiary Lavorwash take to the track, on the circuits of the world MotoGP championship, becoming “Major Sponsor” and “Official Cleaning Technologies Suppliers” of the Honda LCR team (the acronym stands for Lucio Cecchinello Racing). The...

Its name is DSXL-W Geospread and it is a fertilizer spreader able to work at high speeds, even with the application of variable speed fertilizer. It was created by Kubota which, in designing the machine, paid particular attention to the...

Time for new products at Kuhn’s. The French brand is launching a new range of brushcutter arms, the Agri-Longer GIIs, which expand an already very rich catalogue. In the landscaping segment Kuhn is also present with the Poly Longer GII...

The latest addition to the Kverneland family is the belt swath merger for the 53100MT BX triple combination mower conditioner with a working width of 10 metres. As the manufacturer explains with a technical note, this is a technology designed...

Positive year closing for the German company Lemken. The brand from Alpen (a city not far from Dusseldorf) specializes in technologies for soil processing, and it closed 2018 with a significant increase in turnover, which reached 380 million euros (+6%...

The 190 horsepower of Massey Ferguson takes the lead in the category of medium power tractors (category L), and wins the title of “Machine of the year 2019” at the Sima in Paris. “This award enhances our commitment to the...

The McCormick’s X8 VT-Drive series was one of the most anticipated product lines at the SIMA in Paris and it lived up to expectations. It is a range made up of three models designed for performance, reliability and comfort, and...

Two new models of the six-cylinder T6 range by New Holland are presented to the public for the first time during the Parisian SIMA exhibition. The new models, T6.180 Dynamic Command and T6.160 Electro Command, respectively rated 145 and 135...

H40 S is the entry-level model of the Hurricane range of flail mowers designed by Rotomec, the company from Verona, (headquartered in Nogara) for professional use. In fact, Hurricane H40 is a horizontal-axis movable mower characterized by high standards of...

In the forestry tiller segment, FAE presents the new SSH-SSH/HP with fixed tool rotor, for tractors between 160 to 500 horsepower. As explained by the company from Fondo (Trento) on its website, this is a model designed for heavy duty...

At the forefront of the development of electric drive tractors, back in 2016 John Deere presented the first full electric prototype called SESAM. Now the American giant has developed a new electric model powered by cable, GridCON, able to develop...

Their name is Cingo and they are multi-tool tracked conveyors designed by the Cuneo company Merlo (the headquarters are in San Defendente) to offer primary operators multi-purpose and versatile work tools. The characteristic of the range, which is in the...

Although they are still awaiting validation, the preliminary studies by the Milano1 University on the quality of forage collected with the Repossi Ra-Rake rake are decidedly positive. These tests revealed that the product treated with the innovative rake by the...

Last October, the Arag Group announced the acquisition of Ynnova, a mechatronics engineering company specialized in the Industrial Internet of Things. The partnership, strengthened by the acquisition, aims to offer manufacturers of agricultural machinery a complete service, from the design...

The Fabbrico Group closes 2018 in style. At the beginning of December, did Argo tractors not only start the construction of the new French branch in Vaulx-Milieu, the Isère town south-east of Lyon, but also signed an important collaboration agreement with India's ITL, sixth manufacturer in the world in the range from 20 to 120 Hp

For the productive fabric located in the Bologna area, where it feeds dynamic linked industries, this company is a real point of reference. Working on product and process innovation, it has become one of the leading market players, and –...

The CBM Group, through its subsidiary MITA Oleodinamica Spa of Tregnago (Verona), acquired 55% of Jingshan Company Co. Ltd, a Luoyang Chinese company specialized in the production of hydraulic components for agricultural tractors. The new entrepreneurial player will soon be...

A great party with 250 customers celebrated the opening of the new Campogalliano (Modena) plant, which covers an area of 4 thousand square metres. Emiliana Serbatoi, a company specialized in the production of tanks and storage, transportation and fuel distribution...

It was the distant 1958. TV was still in black and white, internet was a mirage and travelling from Milan to Rome took twice as long. That same year, Claudio Martignani, founder of the homonymous company based in S. Agata...

New strategic partnership on the Polish market between Faresin Industries and Korbanek sp.Zo.o. Last August the company form Breganze announced an agreement with the Polish partner, one of Europe’s biggest importer of agricultural machinery. The strong international vocation of Faresin...

The Kuhn Group made new investments in the plant of Saverne (France). Last September was in fact inaugurated a new logistic center, an ultramodern structure of 10,000 square meters, at the cost of € 20 million. The investment made in...

A time for launches for the Alliance brand. At Euroforest, an exhibition dedicated to forestry held from June 21 to 23 in Dijon (France), the Dutch group launched the new F344 tyre, a low inflation pressure model intended for forestry...

This June 29th, the La Borina Agritourism in San Bonifacio (VR) hosted the press conference promoted by Alpego to present the economic data, the range of products and the prospects for the development of a company (based in Lonigo in...

Annovi Reverberi, a Modena-based company specialized in the production of diaphragm pumps for agricultural applications, piston pumps for industrial applications and high pressure washers, opens its first production plant in the USA, thanks to the acquisition of Ace Pump Corporation....

The partnership between the Argo Tractors Group, owner of the McCormick, Landini and Valpadana brands, and Topcon Agriculture, one of the world’s leading manufacturers of precision systems applied to agriculture, was launched in recent weeks. Announced in November, at Agritechnica,...

The “Serie B” league has a new sponsor; BKT, an Indian multinational specialized in the production of Off-Highway tyres. The partnership was signed at the end of June at Torneria Tortona, in the centre of Milan, between the national professional...

An innovative approach in the fight against weeds thanks to the technology developed by Caffini, which uses the power of water thrown at a high pressure on plants. This machinery, which was already awarded at EIMA 2016, is raising a particular interest among the farmers

Produced by Claas, the Disco front mower ranger is now broader. The German company has launched two new models on this product range - Disco 3600 MOVE and Disco 3200 MOVE, with widths of 3.0 and 3.4 metres - offered...

Command PRO EFI ECH440 is a single-cylinder 14-horsepower engine with electronic closed-loop injection technology (EFI), developed by Kohler to provide fuel efficiency, reliability and optimized ignition procedures even in the most difficult working conditions. As the manufacturer explains in a...

Performance, comfort and manoeuvrability are the strengths of the new MGX Kubota tractors, a line consisting of five models with eight-speed Powershift transmission over three ranges (high, medium and low) for a total of 24 forward and 24 reverse speeds....

The Maschio Gaspardo Group is back in the black with profits of 5 million euros. The Ordinary Shareholders’ Meeting certified it with the July approval of the consolidated financial statements for the 2017 financial year. The accounting and financial documents...

The Nobili company was rewarded for the Ventis FF Pro towed sprayer with staggering head, as part of the initiative “Vota in Vigneto” [Vote in the Vineyard] organized for Enovitis in Campo, held last June in Fabbrico. The Bologna-based company...

Great news from the Repossi brand. The company from Pavia - the headquarters are in Casorate Primo - expands the range of haymaking machines with the RA-Rake model, an innovative stellar rake that will be marketed starting next May. This...

The Series R of the most compact and narrow range of tractors in their category is certain to draw special attention. Also highlighted will be the Tony 10900 TR model, an isodiametric tractor with a steering chassis and a variable, hybrid-hydrostatic-mechanical transmission

The Lombard Group, present at Fabbrico (RE) for Enovitis in Campo, showcases its full line of specialized tractors for vineyards. The spotlights are aimed at the Volcan L80, available in three versions; AR, RS and Dualsteer

The 2018 edition of Vite in Campo, the event of field trials of machinery and equipment for viticulture held at the end of May in Susegana near Treviso, featured the Series P by the Abruzzo manufacturer Arrizza among the leading...

This equipment for eco-compatible operations between rows has been designed and built by Lotti Attrezzature Agricole in the Caba Group and will make an official debut at EIMA International next November. The IT30 model was created with the use of...

Time for new products in the Caffini house, with the debut of Spray Veg, a sprayer designed for range IV horticultural crops. Suitable for greenhouse or open field work (on 4 rows) and equipped with asymmetrical hydraulic bar (three working...

The Vicenza-based company Caron continues developing its range with the renewal of the transporter series. The CT models with rigid axles and CTS/CTA, equipped with overlapping triangles suspension, self-levelling and lockable on both axles or only on the front axle...

The Sekerpinar production plant was inaugurated in April, thanks to a joint venture between the Emilia-based company and the Turkish holding company Anadolu Group. It starts with the production of the four Globe models, which by the end of the year will be followed by the Rex, Powerfarm and 5H

Model Farm is the name of a project launched by Maschio Gaspardo to create strong synergies with companies in the primary sector through a full immersion into products of the Paduan company. It is no coincidence that the watchword chosen...

After forty years of design activity applied to the agricultural and industrial mechanics sector, Serigrafia 76 changes its name to "76 Industrial Graphics Evolution". The new brand is the result of an internationalization strategy which, starting in 2013, saw the Montecchio company consolidate its place on global markets

Pneumatic and electromechanical olive harvesters, motor-compressors, pneumatic and electronic secators: Campagnola of Zola Predosa (Bologna) presented all the highlights of its collection at the 50th edition of Agriumbria, held in Bastia Umbra from April 6 to 8. As explained by...

The heart of the new line of mixer wagons produced by the Venetian company is the PFM system based on homogeneity and selection indexes that allow to know and manage the quality of the ration

On 14 March 1918, the acquisition of the Waterloo Gasoline Engine Company in Iowa marked John Deere’s entry into the tractor business. It was a debated and controversial investment because many critics did not believe in the future of self-propelled...

The new solutions by Massey Ferguson for agriculture are very evident at the Verona show. From specialized tractors to round balers, from mowers to services, the manufacturer offers operators in the sector the opportunity to choose from a wide range of products designed to optimize agricultural work

The new New Holland TK4 cab for tracked utility vehicles is presented in a world premiere at Agriumbria 2018. Available on four of the thirteen models in the range, for the “mountain” and “full-field” versions, the new New Holland cab...

Topcon Agriculture expands the range of touchscreens of the “X Family” with a new 8.4” monitor. This is the X23 model, a high-performance device characterized by its significant flexibility, thanks to which it is able to meet the different production...

Valtra is the first tractor manufacturer in the world to start using Neste MY Renewable Diesel as starter fuel for all new tractors. Since March of this year, all the new Valtra brand tractors, as well as all the forklift...

The new year began for BCS at Fieragricola with the presentation of the new 770HY PowerSafe two-wheel tractor. This model is equipped with a hydrostatic transmission which is reversible and multifunctional with a PowerSafe hydraulic oil bath clutch. The 770...

Emiliana Serbatoi presented the Tank Fuel with a 110% containment basin at the Verona event. The new line of fuel tanks for storing and dispensing diesel arises from the need to adapt the Modena company’s range to the ministerial decree...

The SPV and SPV POWER models are equipped with a rear axle which ensures an excellent turning radius, slightly more than 6 meters ideal for maneuvers in the tight spaces typical of many livestock raising areas

The new series of tractors for vineyards and orchards, rich in technological devices to improve functionality and comfort, was presented at the Veneto show. The new machines are produced according to the requirements of the European Mother Regulation, which has just come into force

The 4-cylinder McCormick, already winner of the Tractor of the Year 2017 at Agritechnica, also won the innovation award promoted by Fieragricola and Informatore Agrario. SCR for the post-treatment of emissions, three-stage continuously variable VT-Drive transmission, electro-hydraulic PTO; these are the strengths of this tractor

H80 is a horizontal axis rotary flail mower of the Hurricane series, designed by Rotomec of Nogara (Verona) for professional use in the field of public park maintenance or areas adjacent to roadways. The H80 comes with a 152 mm...

From the Tigre 4000 tractors to the T Major series, the Mach 2 and Mach 4 tracked utility vehicles, the Paduan company's stand promises to be full up with machines designed for compactness and performance

The catalogue of this company from Romagna includes 60 models distributed over 10 product lines, and the technologies for organic farming occupy a leading position. The spotlight is on the rotary tillers for minimum soil tillage and the Ecostar SC 600 disinfestation machine that destroys harmful microorganisms with the strength of lime and steam

For FAE, a company based in Fondo (Trento) specialized in the production of forestry applications, 2018 began in the name of the SFM model, which debuted on the market at the start of the new year. This is an application...

A livery that looks to the future for a dynamic and modern design that, according to Ideal of Castelbaldo (Padua), will take hold on those market segments that are also sensitive to the look. The aesthetic restyling of the tanks...

Active Fill control, three-thousand hours of warranty for Dura Line components and a 6-metre Premium 639 collector. These are some of the innovations that the US team launched in 2018 on its line of self-propelled mowers, the 8000 series. Innovations designed to improve comfort and productivity

The Nobili stand at Fieragricola is featuring the Ventis Ff-Pro, an inter-row sprayer ideal for low volume plant treatment in vineyards and orchards capable of handling as many as three rows variable simultaneously from 2 to 3.5 meters with a...

The new Novacat A10 mower combination was put on display in its own stand at Agritechnica 2017. The haying mower features an array of avant garde technologies designed to take advantage of the machine's versatility and ensure top quality operations

All the range of Landini and McCormick tractors will soon be equipped with GPS systems, thanks to a global agreement with Topcon Agriculture. This was announced by the Marketing Director of Argo Tractors Antonio Salvaterra during a meeting with the...

The colossal Indian BKT is a multinational which looks to the future without neglecting human values and the environment. Last year BKT reported turnover of more than $815 million, 65% of which in the sector of witch in the sector of agricultural tires

Many of the models taking centre stage at the Tractor of the Year 2018 competition, which held its award ceremony in Hanover as part of Agritechnica, come from the all-Italian technology of the Carraro Group, one of the main realities...

Beyond Tractor of the Year in the Best of Specialized category, Fendt came away from Agritechnica 2017 with other important recognitions for technological innovations. These were for the VarioPull tractor, the IDEAL combine, the e100 Vario tractor, the DKE agrirouter and the Fendt MARS/Xaver robots

A high profile at Agritechnica for the “Kohler Flex”, the range of emissions filtration solutions that Kohler has designed to allow every KDI engine configuration to comply with the anti-pollution standards and regulations in force in the various national markets....

Kuhn was awarded a silver medal at the Agritechnica 2017 for the manufacturer’s Smart Plowing system. Kuhn’s “Section control” is an electro-hydraulic control system that uses the hydraulic, non-stop break-back system to control the individual plow bodies based on GPS...

The Padua manufacturer brought a wide range of seed drills, sprayers and plows to Agritechnica 2017 in Hanover, all with innovative technologies to make this machinery more productive and versatile at work in the field

On December 16, Pontenure (Piacenza) will host the debut of the new range of open-field tomato harvesting machines created by MTS Sandei. Comprised of three models, the THR line was developed with the support of the Emilia Romagna Region as part of the funding for industrial Research & Development

This Autumn is marked by dynamism for Peruzzo, which recently inaugurated a new showroom next to the Curtarolo (Padova) production plant, and also presented the restyling of the website, redesigned for platform interoperability

Decal In (a subsidiary of Serigrafia 76) will be attending in December some significant events at international level. The Indian production and commercial unit of the company from Montecchio Emilia, since the beginning of its activity in Pune in 2013,...

The BCS Group was one of the protagonists of the latest edition of Agrilevante. The event held in Bari was the opportunity for the Lombardy company to showcase its top models for 2018. The new K40 SDT RS tractor is...

Equipment designed for smaller and larger farms, and for all types of terrain and agricultural crops. This is the range offered at Agrilevante by Celli from Forlì, specialized for over 60 years in the production of soil-processing technologies. A wide...

At the Sitevi of Montpellier, the most important exhibition dedicated to vineyard mechanization, Cima presents an unprecedented over-row head. This is a 6 hand and 4 upper cannons sprayhead that enables vineyard treatments simultaneously covering 6 faces (or 3 rows)...

The market debut of the new Emak-branded professional chainsaws for pruning. GST 360 by Oleo-Mac and MTT 3600 by Efco; these are the initials that identify the new models designed for branch removal, felling and for tree-climbing professionals to work...

At the Agrilevante's event, the Paduan company will exhibit a wide range of tractors specifically designed to meet the Mediterranean agricultural needs and grounds. These isodiametric machines are characterized by their maneuverability and their remarkable operational versatility

For over forty years, CIMA has been taking care of crops by building low-volume pneumatic sprayers and pesticide dusters. The company was born in the heart of the Pavia province, initially dedicated to the protection of the area’s vineyards, then...

The FAE Group headquartered in Fondo, in the Trentino Alto Adige, specialized in forestry and agricultural shredders has presented the new UML/S/DT model forestry mulcher with a fixed tooth rotor system for tractors with power from 130 to 190 Hp....

Seventy years of business and a passion for innovation are the goal that Ideal, a company engaged in the design and construction of machines and equipment for the protection of agricultural crops, celebrates in Bari at Agrilevante. The company from...

News from Kuhn in the baling sector. During the Agrilevante, the French company introduces the new series of VB 3100 variable-chamber round balers. This is a broad range of balers: VB 3155-3185, for dried fodder such as hay and straw;...

The Primus trailed field sprayer, a leading series for the German Agrovision Company Lemken, debuted at the end of July following a total redesign by the manufacturer’s technicians with a new construction design for the working components of the machine...

The FAE company from Trentino expands its range of equipment with two new models, UML/S/EX/VT and SFH, presented at the Sima in Paris and Conexpo in Las Vegas. The first one is a forestry mulcher with fixed teeth rotor designed...

The Kverneland Group Field event was an occasion for the presentation of the Kverneland Academy and put to work various machines manufactured by the Norwegian group. Numerous new features were presented, from the Kverneland Ikarus trailed sprayer to the new Vicon 700 mowers conditioners

The new Series R with a 99 Hp engine is up for a warm welcome at the debut of the articulated isodiametric reversible tractor at Enovitis 2017 for the specialist's great maneuverability and comfort for the driver

Arag in Rubiera in the Reggio Emilia Province, specializing in the manufacture of spraying accessories and the field of precision farming, inaugurated a new factory in Argentina in March. Taking part in the ceremony marking the opening of the plant,...

Since 1997, when the partnership between Honda and BCS began, the GX engines by the Japanese maker are one of the points of pride of the walking tractors by the Milanese brand. “Designed to be reliable and deliver top operational...

An important goal for CBM, as a manufacturer in Modena specialized in agricultural machinery components since the 1960s, rising to success by extending ranges through partnerships and acquisitions to become a leader in the sector with a workforce of one thousand and annual turnover of more than € 150 million

Raffaele Cifarelli and wife Rita founded his company in 1967 in Voghera now celebrating its fiftieth anniversary with a packed schedule of event planned to underscore the role played by intuition and creativity in the life of a manufacturing industry. The festivities are also intended as a look into the future bringing further development thanks to a new organization of the company

The Kuhn GMD disc mower is reaching its fiftith anniversary this year. Back in 1967 the French manufacturer brought its GMD 4 mower equipped with oval discs to the market, a model which ensured a great advance in cutting speed,...

Eco-compatibility and optimum management are the hallmarks of productivity and resources of the New Holland T8 NH Drive autonomous tractors and CX 7.90 combine harvesters with self-levelling Everest systems presented by the manufacturer at the SIMA in Paris and Agriumbria in Bastia

Wrapping is the complete or partial decoration of a vehicle or bodywork, generally applied to cars, buses or subway carriages. It can be achieved simply by painting the surface of the vehicle, but the current standard involves the application of...

After the SIMA in Paris saw the international debut of the Electra 21 mixer, the 36th edition of the National Fair of Agricultural Mechanization, held in Savigliano (Cuneo) from March 16 to 19, marked the official launch of this model...

The new tractor series coming to market by the Finnish manufacturer is equipped with the Stage IV 4-valve Agco Power diesel. This new generation Common Rail engine with the SCR system guarantees great powerful performance with full compliance with European Union emission standards without increased fuel consumption

The UT 110 is the name of a machine built by Andreoli Engineering, a specialized means for the management of vineyard operations. The robust UT 110 with a low center of gravity, excellent maneuverability and traction capability make this machine...

Greater load capacity, excellent traction, larger tread footprint, great durability, less soil compaction and comfort for the operator are the key features of the new VT-COMBINE tires introduced by Bridgestone. Designed for cyclic field operations, the VT-COMBINE with Improved Flexion...

The SP160 is the new Checchi & Magli potato digger rounding out towed machines for small scale mechanization of potato cultivations with the bi-row system. The new machine offers all the solutions built into the single-row versions and features a...

The German company closed 2016 with a turnover of 325 million euros, the same level reached in 2015. Lemken's performance in eastern European markets was very positive, while Germany and France recorded a standstill. New technologies make their debut in 2017, among them the Azurit single-seed drill

The Kubota DSM-W GEOspread is a weighing spreader series with capacities from 1100 to 2450 liters designed for small and medium-size farms ready for new generation technologies capable of ensuring precision treatments and lowering the consumption of fertilizer. On the...

Two new seed drill combination models are arriving with working widths of 3 meters and 4 meters to flank the 6 meter Kverneland flagship machine. Constant uniform depth, excellent preparation of the seed bed and the electronic distribution of seeds are the principal strong points of this new range of seed drills

“Sicma InSieme” (Sicma Together)  is the name of the initiative with which Sicma, in Miglianico (Chieti), is participating in the alternating school-work programme, opening the doors of its plants to students of five classes of the secondary school “L. Acciaiuoli...

The MechFiber 345 SP self-propelled diet feeder based on the self-propelled Pointer and Terrier cutter-mixer wagons by the Italian manufacturer Storti and Kennan made its debut at the Sima Show in Paris. The new self-propelled machine is equipped with a...

The U.S. geopositioning enterprise showcased their most recent products for Precision Agriculture at Sima, the French Agribusiness Show, ranging from autosteering and control consoles and on to systems for fleet management. Topcon unveiled a host of high tech solutions created for improving productivity in the primary sector

The TTR 7600 Infinity from Antonio Carraro will put in its first appearance at the Galabau trade fair in Nuremberg scheduled for September 14 to 17. This new model features the new Infinity hydrostatic transmission, the ACTIO™ full steering chassis...

Maxi Traction 65 is the name of the new agricultural tire from Firestone, in Bridgestone Europe, with an innovative wider and deeper lug design and a wider tire width providing larger contact area and a longer lifespan for the tire....

Hinowa S.p.A unveiled a tracked aerial platform model, the LightLift 15.70 Performance IIIS, at the recent Bauma 2016 in Munich. The articulated structure of the new aerial platform, based on the Goldlift 14.70, is built with high resistance steel and...

The HerbHy 30 is a remote controlled robotic brush cutter from the manufacturer Hymach. The main features of this versatile robot are its compact size and high performance

Countdown to the debut of the particulate filter on the KDI engines made Kohler Engines. The manufacturer made the announcement, explaining how this innovation has its origin in the need to meet the requirements on emissions required for Stage V....

New Holland Agriculture and Mascar, specializing in the field of haymaking and seeding, signed an important accord in recent months in Turin. The contract ratified by New Holland Brand President Carlo Lambro and Sante Maschio, the Mascar CEO, calls for...

Its name is Cleaner 2 and it is one of the top models from the Ortomec range. It is a self-propelled suction machine recommended for processing vegetables and leaf plants such as, for example, rocket salad, spinach, and hydrangea. Cleaner...

From muddy soils to snow-covered ground, all the way to gravel-covered surfaces. Presented in April at the Bauma in Munich, the Panther tracked utility vehicles are versatile and efficient working tools, designed by the German Prinoth to offer high-level performance...

2016 is an important year for Serigrafia 76, as it marks forty years of activity of the company from Montecchio. Leader in the production of decorative patterns for industrial vehicles and agricultural machinery, the company was in fact created in...

AMA unveiled the new Inpulse management system at Bauma in Munich. Inpulse was created through collaboration with Octo Telematics and Ste Industries for increasing data and analyses at the service of the end-user, and operators

An automatic tow hook with a dual safety system to counter accidental unhitching which kicks in when the tow pin reaches a position below hitching is the strong point of the CBM tow hook. The range of the Modena manufacturer also includes the new Slider Automatic Tow Hook, a component for trailers with special 50 mm drawbar eyes

The AW 1070 is a new compacting roller from Atlas Weyhausen with the collaboration of Comer Industries. The AW 1070 is powered by a 62 kW engine for use in the construction industry for stabilizing soil for the construction of roads, runways and railway track beds

The Carrytank by Emiliana Sebatoi presented at the Bauma 2016 is designed for the storage and transport of diesel fuel and AdBlue in a double version 400+50 and 300 liters

The Cube 90 is a new pump station by Piusi ideal for use in the world of farming. The pump has a capacity of 90 l/min and comes equipped with a K44 volumetric liter gauge and a Panther 90 electropump

Depth Control is a new system for regulating harrowing depth creased by the Rima manufacturer. The system enables the operator to control the depths of the tines and regulate the height of work

The ability to grasp changes in the production methods of its customers, and to transform the technical and market challenges into opportunities is the basis for the innovation that led Serigrafia 76 to overcome the problem of decal application to surfaces produced with rotational moulding

The 2016 edition of Enovitis in Campo coming up in Corato, in the province of Bari, will include the Campodarsegno (Padua) tractor manufacturer Antonio Carraro arriving for the presentation of the new Tony 9800 TR e Tony 9800 SR specialist...

Argo Tractors will be leading players with their specialist tractors at Enovitis in Campo 2016 coming up in June in the Torrevento a Corato vineyards in the province of Bari with the support of the Agro dealers in the Puglia...

Ideal in Castelbaldo near Padua has been designing and building machinery for plant treatment in vineyards and fruit orchards and open field weed control and is now in the avant-garde at the level of sustainability of the environment. For open...

The delivery of the first machines seals the partnership between the largest Italian farm and one of the largest global agricultural machinery manufacturers. The order is one of the most significant investments in Europe made by a farm for the renewal of its fleet

New products from the Alpego brand. The company from Gambellara (Vicenza) is launching two lines of rotary tillers with straight blades - Rotolama LZ and Rotopik KZ - available on the market starting in April. There are four models in...

Athena is a self-propelled machine designed by the Modena company Andreoli Engineering for picking olives with non-stop processing along olive rows. The machine’s operating heart is the harvesting chamber, which, equipped with a system of three shakers, provides for the...

Bridgestone has been awarded the John Deere & Company recognition as a Partner-level supplier for 2015, the highest supplier rating in the manufacturer’s Achieving Excellence Program. The staff of Bridgestone Americas, the U.S. subsidiary of Bridgestone Corporation, accepted the recognition...

The manufacturer in Vitorchiano, near Viterbo, presented new models of specialized machinery for the hazel nut supply chain at Agriumbria 2016

Already available for several years in the United States, the “Gator” models by John Deere will mount Camso rubber tracks in Europe too. Designed to further increase the versatility and mobility of these popular off-road vehicles, the Camso tracks reduce...

Kuhn S.A., a major manufacturer of agricultural machinery, created its second Alsatian production site dedicated to the assembly of large machines in Monswiller and is now opening a new phase to meet future challenges by strengthening plants and reorganizing and...

The production plant at Russi (Ravenna), where the new Baler Business Unit kicked off, has renewed its production systems and processes. The market has rewarded the initial innovations developed in the Romagna site after the acquisition of the historic Gallignani brand

The Massey Ferguson  MF 9305 Xtra telehandler opened the way in 2015 and now many of the manufacturer’s new innovations equipping this machine are being extended to other models in the MF 9000 Series, the MF 9306 Xtra, MF 9407...

The new MIG 24 ZP is an ideal vehicle for tight spaces thanks to its double articulation. The electrostatic system guarantees a perfect leaf structure coverage, to the benefit of productivity and environmental safety

The STAR-FC rototiller by Seppi M. is an ideal tool for land reclamation and the stabilization of subsoil in tight spaces. Increased working width, increased engine power, and systems that facilitate job settings are the strong points of the new equipment

In the Langhe, on the hills of Monforte d’Alba, in one of the most prized “cru” dedicated to the production of Barolo, for four generations the Conterno family (Paolo Conterno farm) has dedicated itself to the cultivation of Nebbiolo, as...

The most recent plant treatment product from the Pavia manufacturer CIMA is the ROB3 pneumatic sprayer with a new three drop straddle device and a linkage parallelogram system to equip the low volume pneumatic sprayers of the Link series. Thanks...

Among the key players at the most recent Fieragricola was Emilia Serbatori, a leading Italian manufacturer of tanks and storage equipment for transport and the management of fuels, lubricants and liquids in general, which unwrapped at the international agricultural show ...

New Holland presented at Fieragricola the restyled TC5.90 combine now equipped with a new leveling system, larger front tires and the new Harvest Suite™ Comfort cabs mounted on isolation blocks. The renewed TC5.90 technologies also feature cleaner ECOBlue™ SCR Tier 4 power units and an Autofloat™ system for harvesting sunflowers

The new machines for the harvest of biomass built by the Bologna manufacturer in association with a European Union project aimed at optimizing bio-energy supply chains were recently unveiled at work

The newest product created by Tecnoagri is the model MRS hydraulic bin trapper for tipping bins, industrial containers and other containers designed and built by the manufacturer in Conselice, near Ravenna, for work in the agri-food sector. A Tecnoagri specifications...

The Valtra N Series special edition with bright golden livery graphics customized in the Valtra Unlimited Studio is coming up for presentation in the spring in all the important events in the sector and made available to customers intent on...

Right on time at the appointment in Verona, Antonio Carraro brings to Fieragricola a wide range of tractors, from compact to specialized, hi-tech and basic, focusingas always on technological innovation, quality, and the concept of “custom” tractor, offering bespoke solutions for each user segment.The...

The BCS Group is previewing at Fieragricola Verona the new K105 series, the first specialized tractors with a common rail engine, which complies with the strict parameters of EU legislation on harmful emissions. Thanks to this new technology, the K105...

The Italian brand is presented at the Verona exhibition with important news in their main ranges, both technically and in terms of design and ergonomics. It is a technology development programme that looks to the Italian market as well as the demand from many foreign countries

The manufacturer Sfoggia is arriving at Fieragricola 2016 to unwrap new products, high quality components and an expanded range of technical solutions for various operational requirements

The Emak Group is bringing to the market the 400 and 400 R (reversible) rotary tillers and the 1100 mower for home use under the Bertolini trademark and the corresponding  BRIK, BRIK R (reversible) and the FC 110 mower under...

The debut of the new KDI engines marks an evolution for Kohler Engines, not only in the range of models available on the market but also, and especially, in the area of ​​technical support. This step - explains an information...

For Matermacc, 2015 was a year of transition, marked by the acquisition by the Chinese group Foton Lovol and by quite complex market scenarios; nevertheless, the final balance can be considered satisfactory, given the increase in real turnover (between 8%...

The Scandinavian multinational, one of the top players in tire design and engineered polymer solutions, has consolidated its standing on international markets with the acquisition of ČGS Holding, a Czech Republic industrial group. The agreement was signed towards the close...

From South Africa to the United States, C.i.m.a. SPA in Montù Beccaria in the province of Pavia, has been strengthening its international markets with great expansions in the Asia and Oceanic quarter and especially in Malaysia, Philippines, Korea, Australia and...

BCS held a press conference in Abbategrasso headquarters for the presentation of financial data and the activities of the group. Sales rose thanks to a fine-tuned strategy for the diversification of products and broadening the markets. Human resources are a cardinal factor in the company's philosophy

Autumn opened with important recognitions for Ognibene Power, an Emilia Romagna manufacture reporting € 100 million in sales of hydraulic cylinders, steering valves, APS active power steering and other key components for tractors, excavators, forklifts as well as boats, urban...

The SC605 shaker from Cifarelli in Voghera in the Pavia Province was presented at Agrilevante. The new machine flanks the SC800 model, designed especially for professionals in the sector, provides light weight and greater comfort for the harvest of olives...

The manufacturer has presented a tractor prototype powered by bio-methane in Milan in the impressing setting of their Sustainable Farm Pavilion at the Milan 2015 as an ideal model for energy self-sufficiency farm