Mondo Macchina Nr. 7-9 - Anno 2022

n. 7-9/2022 97 NEWS Mergento VT 9220, quality haymaking con il nuovo ranghinatore a nastro della Pöttinger, si può ottenere un foraggio integro, ad alto valore energetico, con una maggiore quantità di proteine grezze e con una ridotta presenza di ceneri grezze. Il cuore operativo di Mergento VT 9220 è l’unità di convogliamento che assicura un flusso uniforme del prodotto e che è costituita dal pick-up, dal deflettore di lamiera con rullo e dal nastro trasportatore trasversale. Una volta sollevato dal terreno grazie a un particolare dispositivo con denti a strascico, il foraggio viene raccolto dal pick-up e convogliato verso il nastro trasportatore trasversale (con il sistema di guida a camme i denti entrano nell’andana poco prima del nastro). Il punto di convogliamento del pick-up è posizionato 120 mm più in alto del nastro trasportatore trasversale, così il foraggio viene depositato sul nastro per effetto della sola forza di gravità e non da un dispositivo meccanico che potrebbe comprometterne la qualità. Altro plus del ranghinatore di casa Pöttinger è la sospensione centrale delle unità a nastro, che permette un adattamento tridimensionale della macchina al terreno. Questo è possibile grazie alla cinematica del braccio portante che con i tre cilindri idraulici reagisce immediatamente a qualsiasi irregolarità del terreno. Nella modalità di lavoro con deposito centrale dell’andana, l’adattamento in altezza parte da +475 mm e arriva fino a -195 mm e l’oscillazione trasversale da +30° fino a -13°, mentre l’inclinazione nel senso di marcia va da +11,5° fino a 0°. L’operatore può gestire tutte le principali funzioni del ranghinatore dalla cabina del trattore, da dove è possibile cambiare sia il senso di rotazione che la posizione dei due nastri trasportatori per ottenere un’andana centrale, un’andana singola sul lato sinistro o destro, o una doppia andana a sinistra e a destra. with a higher crude protein content and reduced crude ash content. The operational heart of the Mergento VT 9220 is the conveyor unit that ensures a uniform product flow and consists of the pick-up, the sheet metal deflector with roller and the transverse conveyor belt. Once the forage is lifted from the ground by a special device with trailing tines, it is picked up by the pick-up and conveyed to the transverse conveyor belt (with the cam guidance system, the tines enter the swath just before the belt). The conveyor point of the pick-up is positioned 120 mm higher than the transverse conveyor belt, so the forage is deposited on the belt by the force of gravity alone and not by a mechanical device that could compromise its quality. Another plus of the rake from Pöttinger is the central suspension of the belt units, which allows threedimensional adaptation of the machine to the ground. This is possible thanks to the kinematics of the support arm, which with its three hydraulic cylinders reacts immediately to any unevenness in the ground. In the working mode with central windrow deposit, the height adjustment starts at +475 mm and goes down to -195 mm and the transverse oscillation from +30° down to -13°, while the inclination in the direction of travel ranges from +11.5° down to 0°. The operator can control all the main functions of the rake from the tractor cab, from where it is possible to change both the direction of rotation and the position of the two conveyor belts to obtain a central swath, a single swath on the left or right side, or a double swath on the left and right.

RkJQdWJsaXNoZXIy NTY4ODI=