TECNICA 62 TECNICA La Olmi di Castelnuovo Calcea (Asti) ha realizzato il telaio portattrezzi Comby, proposto in 3 diverse dimensioni (S, M ed L) per adattarsi a diversi sesti d’impianto, da accoppiare a trattori di almeno 60 Cv. Anche in questo caso, l’azionamento è idraulico di tipo indipendente, con 3 pompe mosse dalla presa di potenza a 540 giri/min. Il telaio dell’attrezzatura, collegato all’attacco a 3 punti posteriore, prevede un doppio impianto idraulico, per una regolazione autonoma degli organi lavoranti. Nella versione dedicata al diserbo meccanico del sottofila, per facilitare il lavoro dell’operatore sono implementate importanti funzioni, quali il rientro automatico delle testate e la centratura automatica della fila. La Orizzonti di Imola (Bologna) ha in catalogo il Biogreen, un telaio portattrezzi doppio indipendente, che richiede un flusso di 70 l/min per l’impianto idraulico che lo aziona. Sui suoi bracci è possibile montare diversi attrezzi indicati per il vigneto, come dischiere rincalzatrici, dischi interfilari, spollonatrici e andanatrici. La larghezza di lavorazione è compresa tra 2,2 e 3 m, valore che nella versione “Compact” si riduce a 2 m. Sempre Orizzonti offre il telaio frontale doppio Sirio 2, con cui è possibile effettuare l’andanatura dei residui di potatura ma anche, in alternativa, il diserbo chimico localizzato con cupola di protezione. Richiede almeno 30 l/min di portata d’olio, lavorando con larghezze interfilare variabili tra 2,2 e 3,6 m. A richiesta è disponibile l’azionamento elettroidraulico con joystick. La Zanon di Campodarsego (Padova) ha invece messo a punto il CST/F Master, un portattrezzi che prevede l’impianto idraulico collocato posteriormente, mentre il modulo addetto alla lavorazione è abbinato tramite l’attacco a 3 punti anteriore di trattori di potenza fino a 100 Cv. Dedicati sia alle lavorazioni nel sottofila che nell’interfilare, gli organi lavoranti abbinabili al telaio multifunzione sono offers the Expo multifunctional frame, hydraulically operated with an independent control unit. The pump, driven directly by the tractor's PTO, supplies the working parts with a flow of pressurized oil of up to 80 l/min for combined desuckering and weeding, reducing passes, saving diesel fuel and reducing inter-row compaction. Olmi of Castelnuovo Calcea (Asti) has created the Comby tool carrier frame, available in 3 different sizes (S, M and L) to adapt to different planting distances, to be coupled to tractors of at least 60 Hp. Again, the drive is independent hydraulic, with 3 pumps driven by the power take-off at 540 rpm. The equipment frame, connected to the rear 3-point hitch, features a double hydraulic system for independent adjustment of the working parts. In the version dedicated to mechanical weeding under the rows, important functions are implemented to facilitate the operator's work, such as the automatic retraction of the heads and automatic centering of the row. Orizzonti of Imola (Bologna) has a catalog including the Biogreen, a double independent tool carrier frame, which requires a flow of 70 l/min for the hydraulic system that operates it. It is possible to mount various tools suitable for the vineyard, such as ridgers, inter-row discs, shoot removers and windrowers onto its arms. It has a working width between 2.2 and 3 m, which is reduced to 2 m in the “Compact” version. Orizzonti also offers the Sirio 2 double front frame, which can be used to rake pruning residues but also, alternatively, for localized chemical weed control with a protective dome. It requires at least 30 l/min of oil flow, working with variable inter-row widths between 2.2 and 3.6 m. Electro-hydraulic operation with joystick is available on request. Zanon of Campodarsego (Padua) has instead developed the CST/F Master, a tool carrier that features a rear-mountIl portattrezzi Bio Green della Orizzonti di Imola (BO) The Bio Green tool carrier from Orizzonti of Imola (BO)
RkJQdWJsaXNoZXIy NTY4ODI=