
Lechler's new anti-drift nozzles
Lechler, a German manufacturer operating in the spraying sector, will bring its new CowCool to Eima International, a flat jet nozzle developed specifically for wetting systems in livestock farming. The device, as the manufacturer explains in a technical note, is designed to supply water to dairy cows with the aim of reducing heat stress and increasing animal welfare and productivity. Operating in a pressure range of 2 to 4 bar, the nozzle produces large, stable droplets that land directly on the cow's back, allowing for effective wetting. The jet geometry ensures even distribution of water in critical body regions, from the withers to the hip, supporting optimal heat dissipation.
The nozzle is installed above the feed rack at a recommended height of approximately 2.3 m, with a 45° inclination. The spray width of approximately 2.5 m and the defined spacing between the nozzles ensure targeted coverage while keeping the feeding and resting areas dry. The key innovation of CowCool is its optimized droplet structure and trajectory control, which ensures precise water delivery to the animal without generating drift or unwanted mist. This prevents the feeding trough and cubicles from getting wet even in stables equipped with ventilation systems or with drafts.
The nozzle features a water blade design with defined spray geometry, for uniform distribution in both transverse and longitudinal directions.
The system is also designed for simple integration with Multijet bayonet systems. Compared to conventional cooling or misting solutions in livestock farming, CowCool focuses on targeted wetting rather than air humidification, achieving more effective heat reduction with lower water consumption and improved hygienic-sanitary conditions in the barn.
Also on display at EIMA is the IDKN series with the 120-025 nozzle, a compact air-induction fan model intended for the application of plant protection products. The nozzle generates a spray angle of 120° and operates in a low to medium pressure range (approximately 1-6 bar), producing a spectrum of coarse to ultra-coarse droplets and significantly reducing drift.
Intended for use on boom sprayers for extensive crops (cereals, corn and rapeseed), the IDKN 120-025 allows the operator to work with reduced outflow volumes while maintaining the same fundamental air injection principle. The main strength of this device is the combination of low volume application capacity (<200 l/ha) and high drift reduction potential.
The XD 120 flat jet nozzle for the application of plant protection products and liquid fertilizers in extensive crops rounds out the range of Lechler product offerings. It is designed as a fan nozzle with a spray angle of 120° and is suitable for both conventional (non-PWM) and pulse-width modulated (PWM) spray systems.
The nozzle operates in a pressure range between 1.5 and 8 bar and is available in different sizes (from 02 to 15), which allows it to adapt to different spray volumes and weather conditions.
The XD 120 produces a spectrum of droplets from very coarse to extremely coarse, offering stable spray quality and reliable coverage even under challenging application conditions.
The device is optimized for both non-PWM and PWM systems, maintaining a uniform droplet spectrum even in pulsed operation mode. This makes it particularly suitable for modern precision agriculture spraying technologies.
The XD 120 offers up to 95% drift reduction potential over a wide pressure range and, its nozzle-in-cap design allows for quick replacements without the use of tools via the Multijet bayonet system, improving operational efficiency and reducing downtime.










