Information on the mechanization of agriculture, gardening, components and multifunctionality.
Special

Safety first with TorqFree: the automatic torque limiter

by Roberto Bonora
October - November 2026 | Back

Eurocardan, an Italian company based in Abruzzo that designs and manufactures cardan shaft systems, is presenting TorqFree, the automatic torque limiter with permanent disengagement, at EIMA International. This automatic radial cam safety device cancels torque transmission when the value exceeds the preset calibration value. The peculiarity of the device is linked to its configuration: when it is activated it remains locked in “neutral” until an operator intervenes. Resetting is done manually using a special release flange or, alternatively, through a remote system positioned near the device itself (which acts on the same flange). This forces the operator to physically go to the area where the device is located to perform the reactivation, facilitating verification of the causes that led to the activation. In haymaking machines and high-density big balers, the limiter can be positioned between the flywheel and the gearbox, so as to decouple the flywheel (and its inertia) in the event of an overload due to sudden flooding or jamming. The operating torque with which this device is calibrated, is estimated up to a value of 6,000 Nm for its indicated application, but it can also be configured to much higher values, in the order of 10,000 Nm. With the introduction of the new limiter, the Abruzzo-based company hopes to address at least three critical issues: the uncontrolled or unexpected reactivation of the device when torque drops even momentarily, resulting in operational instability; risks to the operator who could inadvertently reactivate the system during checks if safety instructions are neglected; and untimely wear and tear of components due to repeated engagement and disengagement. The limiter, which is the subject of a patent application, has a mass of 41 kg, a diameter of 330 mm and a height of 165 mm.

THE MOST READ of the latest edition