
CLAAS expands its Volto range
Two years after the launch of the first four innovative Volto tedder models (1300 and 1500, also available in a version with self-steering frame wheels), CLAAS is expanding its range and presenting seven new machines with working widths between 6.6 and 10.8 m, which share many technical features with the larger models, but also include several new features. We will try to give a brief overview here. The rotors of the seven new Volto and Volto T models have a diameter of 1.50 m and six tine arms each (the diameter can be up to 1.70 m with seven tine arms in the case of the Volto 800) and feature Max Spread technology distinguished by tine arms inclined at 29.3° with respect to the main axis. The small diameters and double hinges on the bottom of the rotor allow the forage to be collected layer by layer by the tines (all of the same length and 9.5 mm thick), ensuring uniform mixing and distribution. The spreading angle can be adjusted to 12, 16 and 18 degrees without tools, using the rotation pins on the rotors.
With the aim of maximizing yields per area and ensuring greater grip on slopes, CLAAS has equipped the new Volto with a hydraulic stabilizzer/reaction arm (CKL) as standard on three-point hitch models. Advantages worth noting include the adoption of Permalink HD transmission, already present on the 'big brothers' Volto 1500 and 1300 T/TS. The work of the German company has resulted in a low-maintenance mechanism, equipped with a finger coupling system capable of ensuring complete power transmission up to 180 degrees, but also with modular, sealed and oil-bath rotary gearboxes, designed for multi-year maintenance intervals. The input shaft speed has been increased by 50% to reduce torque on the drive shafts.The tedders are equipped with newly developed L-axles and 16-inch wheels with centrally mounted tires and reinforced bearings for both headland maneuvering and road transport.
CLAAS also plays the simplicity card with its new tedders and points out that no terminal is required to operate the Volto. The headland position integrated into the hydraulic tipping mechanism makes a double-acting tractor valve sufficient for operation (single-acting for the Volto 700). In the case of optional equipment, an additional single-acting distributor is required. Other new features include the trapezoidal support frame with three-point hitch close to the tractor. According to the Harsewinkel-based company, this structure reduces the lifting force required, allowing the use of tedders with smaller tractors and at the same time ensuring better visibility of the rotors. The frame structure has hollow square section profiles rotated 45 degrees and 8 mm thick. The Volto machines are equipped with LED lighting and, once folded, have a width of less than 3 meters.
Torion 537e Sinus, electric wheel loader. The Volto range is not alone among the new CLAAS models. The new electric version of the Torion 537e Sinus makes its debut in the wheel loader segment, capable of providing battery autonomy of up to 16 hours. Belonging to the 6-ton operating weight class, this vehicle combines the dynamics of the Sinus steering system with a latest-generation, highly efficient, zero-emission battery-electric powertrain.
In the new model, the diesel engine and hydrostatic transmission have been replaced by a purely electric drive system. The lithium-ion battery, featuring a modular architecture, has a standard energy capacity of 32.2 kWh or, optionally, 64.4 kWh, with an average nominal voltage of 322 V. The powertrain delivers up to 30 kW for mechanical drive and 15 kW for the hydraulic work pump. The system supports 'regenerative braking': during deceleration or when driving downhill, kinetic energy is converted into electrical energy and fed back into the battery. The integrated on-board charger restores a full charge in 1.5 to 3 hours, providing logistical flexibility without the need for external charging hardware.
The performance, CLAAS points out, is equal to that of the equivalent internal combustion model, the Torion 537 Sinus. With an operating weight of 5,910 kg, the Z-bar kinematics delivers up to 48 kN of breakout force. The hydraulic system, equipped with a 75 l/min pump at 240 bar, ensures rapid work cycles: lifting, tipping and lowering take 4.9 seconds, 1.7 seconds and 3.5 seconds, respectively. The bucket pivot pin can reach up to 3.215 meters in height.
Agility in tight spaces is maximized by the Sinus steering system, a hybrid geometry that combines articulated steering (central joint with a 30° steering angle) with a self-steering rear axle (with a 25° steering angle). The configuration reduces the minimum turning radius to 3.52 meters and optimizes rollover stability, ensuring an operating weight to tipping load ratio of 3,750 kg at maximum articulation.
The electric powertrain significantly lowers the noise pressure in the cabin to just 65 dB(A). The operator has a height-adjustable touch-screen terminal for real-time monitoring of the vehicle's telemetry and charging status (SoC, State of Charge). The CLAAS connect digital infrastructure enables remote fleet management, predictive diagnostics, and access to maintenance history, operating manuals, and e-commerce for spare parts.
Two new Arion 6 Cmatic models. The final step is dedicated to the tractor segment, in which CLAAS announces the completion of the Arion 6 Cmatic series with the launch of two 145 and 165 Hp models, which will join the top of the range Arion 6.190 Cmatic (205 Hp), presented at Agritechnica 2025.
The three models in the series have an innovative design inspired by the Xerion 12 and Axion 9, a 6.8-liter six-cylinder engine and a maximum torque (at 1,500 rpm) ranging from 640 Nm in the Arion 6.140 to 849 Nm in the 6.190. The continuously variable transmission CLAAS Cmatic is equipped with Auto Load Anticipation for predictive and adaptive management of the powertrain, an innovation awarded less than a year ago at Agritechnica in Hannover. New features in the series include the K80 suspension, the new seat with massage, ventilation and heating functions and a revamped lighting system with up to 20 LED lights.










